Snap XT device guideUser Guides

Temperature Calibration

Go to Temperature Settings → Click on TEMPERATURE CALIBRATION.

Temperature Calibration: Click on Temperature Calibration.

Distance: Set the distance value. Default value is 50.

CALIBRATION – Click on CALIBRATION to scan the temperature. Once the temperature scan is done, it will show the scan results and the status should be ‘Calibration success!’.

Tip: First, keep the distance between the face and the device 50 cm/ approximately 2ft, click the calibration button to calibrate. Please don’t move the face during the calibration process until the calibration is completed.