Getting Started


  1. Open the box

  2. The box contains:

    • The SNAPXT device.

    • The connecting cable with five points, namely,

      1. DC 12V Output

      2. Relay

      3. Power Supply

      4. RS485/ Wiegand

      5. RJ45

    • The power adapter.

  3. Plug in the white pin into the back of the device carefully.

  4. Connect the adapter to a power socket and the other end of the adapter to the ‘Power Supply’ point on the white cable.

  5. The device should switch on after the connections are made.

Leave a Reply