SNAP XT – General Set upSnap XT device guideUser Guides

CERTIFY Snap – Temperature Settings

Temperature Settings

Temperature Settings enables to set temperature threshold and calibrate temperature.

Set Temperature Threshold – Set the temperature threshold value. Choose Fahrenheit or Celsius according convenience.

Temperature Compensation: To set the temperature value above or below the threshold, set a compensation value. (+ for above and – for below threshold). Example values are shown in the image above.

Temperature Calibration: This feature is to test the temperature scan is operating efficiently.
Distance – Ensure that the device reads 50 centimeters.

CALIBRATION – Click on CALIBRATION, it start Calibrating and should give Calibration success message as shown in the image below.

Tip: Make sure the face is 50 cm away from the device/ approximately 2ft.
Please don’t move the face during the calibration process until the calibration is completed.