Any update on the device setting locally would be overwritten with the setting from the CERTIFY.me portal. Please make changes on CERTIFY.me portal if would want the setting to default on all the devices.
When the Device tab is clicked, the following page will be visible where the Global settings of the device and the Device configurations can be changed.
Under this section the user can set a Global password to access the devices.
By default, the password is last 6 digit device serial number.
If the user wants to set global password, the password has to be entered under Device Access Password and click on ‘Save’ button. Post which, the device will be asked to enter the password to access the device globally.
Under this section the user can set the device configurations.
For this, the user has to click on Add button at the corner end to configure the settings manually, also to see the ‘by default’ settings, clone icon has to be clicked under ‘Actions’.
After clicking either Add button or clone icon, the user can set the configurations under Home View, Scan View, Confirmation View and Guide Messages as shown in the below image.
For each new configuration, a unique ‘Settings Name’ has to be given.
Use the respective + symbol icon to make the changes in Home View, Scan View, Confirmation View, Guide Messages tabs
Logo: The existed logo can be changed by selecting a new image which is matching the size and memory restrictions as shown above. Also the logo can be deleted by using close icon.
By default thermal check is enabled. It can be enabled or disabled by checking and unchecking the checkbox.
In the large text box “Thermal scan” is the default text and
In small text box “Welcome” is the default Text.
User can make changes in the above fields in the Home View section.
To display temperature select ‘Yes’.
Select ‘No’ if not required.
Capture image of user:
To capture images select ‘Yes’.
Select ‘No’ if it is not required.
To capture only high temperatures select yes, otherwise select ‘No’.
Enable sound on high temperature: To hear sound when the temperature is above threshold select ‘Yes’. Select ‘No’ if the sound is not required.
the screen delay time is 3 seconds, high temperature threshold is 99.
Read and display temperature in: Temperature can be displayed either in Fahrenheit or Celsius by using it.
Allow low temperature scanning:
To scan the temperature less than the ‘low temperature threshold’ select ‘Yes’ or else select ‘No’.
By default, low temperature threshold is 93.2.
Enable Confirmation Screen: To enable confirmation screen, select ‘yes’. Select ‘No’ to disable the confirmation screen.
The main text and sub text will be ‘Thank you’ by default under confirmation text for temperature below and above threshold. User can change this field if needed.
Enable Confirmation Above Threshold: To enable confirmation screen for temperature above threshold, select ‘Yes’. Select ‘No’ to disable the confirmation screen.
Enable Guide Messages: To enable guide messages, select ‘yes’. Select ‘No’ to disable the guide messages.
Guide Message: There are three default guide messages as shown in the above image. The above fields can be changed by the user.
After making the required changes in Home View, Scan View, Conformation View and Guide Messages click on ‘Save’. The new configuration setting will get added under the Device Configurations list.
When the Notifications tab is clicked, the following page will be visible where the temperature notification of a device can be enabled.
For this, the user has to click on Add button, then the following page will be visible.
Check the check box beside ‘Enable High Temperature Notification’.
Select the specific device name from the Device Name dropdown, to which temperature notification has to be enabled.
Enter the Mobile number under Mobile Text Box, to which the notification has to be sent.
Enter the Email address under Email Text Box, to which the notification has to be sent.
Click on ‘Save’ button.
‘Add’ button can be used each time when the user wants to add the new device under the enabling list.
‘Save’ has to be clicked each time after the user enables the high temperature notification, entered the respective mobile and email details for a particular device.
When the ‘Account’ tab is clicked, the following page appears where the account details are visible.
‘User’ and ‘Admin’ can see their individual account details in this page. To ‘Super Admin’, the recently added account details will be visible in this page.
The existing details of user account can be modified in this page by filling or modifying the mandatory fields as mentioned below.
Account Name: Enter or modify the company name in the text box under this field.
Address Lines: Enter or modify the address details of the company in the two text boxes under Address Line1 and Address Line 2.
City: Enter or modify the city name in the text box under this field.
Country: Select the country from the dropdown under this field as shown below.
State: Select the state from the dropdown under this field as shown below.
Zip Code: Enter or modify the zip code of the location in the text box under this field.
Phone: Enter or modify the phone number in the text box under this field.
Contact Name: Enter or modify the contact name in the text box under this field.
Contact Email: Enter or modify the contact email in the text box under this field.
Time Zone: Select the time zone based on location from the dropdown under this field as shown below
Click on ‘Save’ button at the bottom end after entering or modifying all the above details.
You must log in to post a comment.