Global Settings- Allow the admin to store the Device access password globally of the active device serial numbers in the Device management list
Device Configuration– This section contains list of Settings Name that are assigned with particular devices that is stored in Device Management List.
ADD Button- Allow the admin to create new device settings for the particular device.
Edit-Allow the admin to edit the setting details
Clone- Allow the admin to set the default settings
Delete-Allow the admin to delete the settings which is not mapped to device.
Setting Name – Name of the Device settings
Device Settings-Allows the admin to sync Online member data to device.
Type of Settings
Home view- It contains text with Welcome notes and Image which will be displayed in device home page.
Scan view – It contains settings related to facial scan, Image capture,sound,mask detection, display temperature on the screen and screen delay.
Confirmation view – It contains confirmation enable/disable,Confirmation screen for high/normal temperature.
Identification settings-It contains enabling/disabling of QRcode/RFID code/Barcode.Facial threshold,Image confirmation on screen
Access control – Related to door access based on temperature conditions.
Guide settings- Message to be displayed when the user is not in proper facial scan.
Home view- Settings related to Insert an image,enable home screen, Welcome text and subtext,Screen delay for the home page and enable only text mode..
High Temperature – It contains the high temperature value to be wriiten based on tempearture format.
Temperature Compensation- Compensation value related to temperature network.
Enabling / Disabling-
Image capture for all users
Image capture for high temperature threshold.
Sound for high and normal temperature
Screen delay- timeout for temperature facial scan.
Enabling/Disabling Confirmation screen and also contains text messages for high and normal temperature threshold.
Guide view- Messages are to be displayed when the user forehead is not in proper position
Identification settings-It contains enabling/disabling of QRcode/RFID code/Barcode.Facial threshold,Image confirmation on screen and Facial recognition.
Enable Temperature scan under Scan view settings
Allows to do perform facial temperature scanning with capturing images
Disable Temperature scan under Scan view settings.
For RFID –>When tapping RFID Cards on the device. The behaviour is just “:Thank you “confirmation message appears and goes back to home page.
For QRCode –>When scanning QR Code on the device. The behaviour is just “:Thank you “confirmation message appears and goes back to home page.
For Facial –>When member stands for facial scan near the device,The behaviour is just Facial Camera is open and just “:Thank you “confirmation message appears and goes back to home page.
For Wave –> When member perform wave interaction,The behaviour is the member answer the questions and just “:Thank you “confirmation message appears and goes back to home page.